CCNA 國際認可證書課程 (Fast Track) (200-301)
課程簡稱：CCNA 2026 Training Course (Fast 200-301) (提供 7x24 實習器材)

最新內容：緊貼 CCNA 考試 200-301，並由 Franco Tsang (CCIE #19772) 親自教授，信心保證！

合格保障：學員若考試不合格，本中心均會代付考試費，令學員可 免費重考 ！詳情...

Cisco Systems Inc. 是全球最大的網路設備生產商，在世界各地設有 120 個以上的分支據點。 Cisco 的產品包括 Switch (交換器)、LAN Router (區域網路由器)、WAN Router (廣域網路由器) 及 IOS (Internetwork Operating System) 網路管理操作系統等。全球的大企業、銀行、大學和政府機構之網路設備，無一不採用 Cisco 的產品，因此，管理Cisco網路設備便成為一門專業的學問。

為了能證明你有專業水準來安裝、設定及管理 Cisco 的網路產品，Cisco 便推出其 CCNA (Cisco Certified Network Associate，Cisco 認可網路夥伴) 國際認可考試。本中心的 CCNA 課程 (Fast Track) 由 Franco Tsang 籌備多時，精心編排。由上堂、溫習、實習、考試研習、做試題至最後考試，均為你度身訂造，作出有系統的編排。務求令你快速地取得認證。

只要你於下列科目取得合格成績，便可獲 Cisco 頒發 CCNA 國際認可證書：

本中心為Cisco指定的CCNA考試試場，報考時請致電本中心，登記欲報考之科目考試編號、考試日期及時間 (最快可即日報考)。

臨考試前要繳付考試費 (見上表)，及必須出示下列兩項有效之身份證明文件，否則考生不可進行考試，而已繳付之考試費亦不會退回：
1. 香港身份證   及
2. 附有考生姓名及簽名的證件 (如信用咭、香港特區護照、BNO等)

考試題目由澳洲考試中心傳送到你要應考的電腦，考試時以電腦作答。所有考試題目均為英文，而大多數的考試題目為單項選擇題 (意即 O) 或多項選擇題 (意即 口)，其餘則為拖拉題及實戰題。作答完成後會立即出現你的分數，結果即考即知！考試不合格便可重新報考，不限次數。欲知道作答時間、題目總數、合格分數等詳細考試資料，可瀏覽本中心網頁 "各科考試分數資料"。

1. Networking Model
1.1. OSI Reference Model
1.2. Layers Interaction (交互作用)
1.3. Internet Reference Model

2. Ethernet (以太網)
2.1. Logical Bus Design
2.2. Logical Switching (交換) Design
2.3. Copper (銅) Ethernet Cable
2.4. Rollover (翻轉) Console (控制臺) Cable
2.5. Fiber Optic Cable (光纖線)
2.6. Half-duplex (半雙工) Ethernet and Full-duplex (全雙工) Ethernet

3. Detail Concepts on Logical Switching
3.1. Switching Mechanism (機制)
3.2. More about MAC address table
3.3. Exercises about MAC address table
3.4. Collision and Broadcast Domain (碰撞及廣播域)

4. Features Provided By Cisco Switches
4.1. Basic Concept of Virtual (虛擬) Local Area Network (VLAN)
4.2. Spanning Tree Protocols
4.3. Configuration and More Concepts of VLAN and VLAN Trunk
4.4. EtherChannel
4.5. Port Security
4.6. CDP and LLDP
4.7. Voice VLAN

5. IP Addressing
5.1. Structure (結構) of IP Address
5.2. Concept of Binary Number
5.3. Identifying (辨認) the Network ID without Subnetting (子網路化)
5.4. Subnet Mask (子網路遮罩)
5.5. Subnetting (子網路化)
5.6. VLSM (Variable Length (不定長度) Subnet Mask)

6. TCP/IP
6.1. Transmission Control Protocol (TCP)
6.2. User Datagram Protocol (UDP)
6.3. Internet Protocol (IP)
6.4. Address Resolution Protocol (ARP地址解析協定)
6.5. Internet Control Message Protocol (ICMP)

7. Overview (概論) of Cisco Routers
7.1. Memory
7.2. Booting the Router
7.3. Interfaces

8. Basic Router Management
8.1. Features of CLI (Command Line Interface)
8.2. Obtaining General Information of a Router
8.3. Configuration Management
8.4. Configuring Password and Telnet Access
8.5. service password-encryption

9. Static Routing (靜態路由)
9.1. Route Entries for Directly Connected Networks
9.2. Examples of InterVLAN Routing (Router-on-a-stick and L3 switches)
9.3. Static Routing Entries
9.4. Routing Entries Matching Order

10. Dynamic Routing (動態路由)
10.1. Introduction
10.2. Administrative distance (AD) and metric
10.3. OSPF (Open Shortest Path First)
10.4. Configuring OSPF (Broadcast) on Cisco Routers
10.5. Configuring OSPF (Point-to-point) on Cisco Routers
10.6. Passive Interface Concepts for OSPF and other routing protocols
10.7. Floating Static Route
10.8. Configure Floating Static Route as a backup route for OSPF
10.9. EIGRP (Enhanced Interior Gateway Routing Protocol)
10.10. Route Summarization and Auto Summarization
10.11. EIGRP Feasible Distance (FD), Reported Distance (RD) / Advertised Distance (AD), Successor, Feasible Successor
10.12. BGP (Border Gateway Protocol)
10.13. Basic Configuration of BGP

11. Access Control Lists (ACLs)
11.1. Access List Rules
11.2. IP Standard / Extended Access List
11.3. Access List Numbering
11.4. Access List for Inbound (入) / Outbound (出) Data
11.5. Examples of Configuring IP Access Lists
11.6. One More Example on Filtering Data Traffic
11.7. Named Access List

12. NAT (Network Address Translation)
12.1. Public IP Address and Private IP Address
12.2. Dynamic NAT with Overload (負荷)
12.3. Configuration of Dynamic NAT with Overload
12.4. Configuration of Static NAT

13. SSH (Secure SHell)

14. IPv6
14.1. Overview
14.2. IPv6 Addressing Representation
14.3. IPv6 Address Types
14.4. Modified EUI 64 for interface ID
14.5. SLAAC (StateLess Address AutoConfiguration)
14.6. Configuring IPv6 Address on Cisco Router (SLAAC and Static Routing)
14.7. GRE / 6to4 tunnelling

15. IP Services
15.1. NTP (Network Time Protocol)
15.2. DNS (Domain Name System)
15.3. First Hop Redundancy Protocol (FHRP)
15.4. FTP and TFTP
15.5. DHCP (Dynamic Host Configuration Protocol)

16. Network Security
16.1. DHCP Snooping (窺探)
16.2. Examples of Configuring DHCP Snooping
16.3. Dynamic ARP Inspection (DAI)
16.4. Examples of Configuring Dynamic ARP Inspection (DAI)
16.5. STP Security: BPDU Guard
16.6. STP Security: Root Guard
16.7. DTP Security, VLAN Hopping attacks
16.8. Key security concepts
16.9. Security program elements
16.10. Password management
16.11. Firewall
16.12. Intrusion Prevention System (IPS)
16.13. VPN (Virtual Private Network)
16.14. AAA
16.15. IEEE 802.1x

17. Monitoring and Logging
17.1. SNMP (Simple Network Management Protocol)
17.2. System Logging (Syslog)

18. QoS (Quality of Service)
18.1. QoS Overview
18.2. The Whole Picture of QoS Learning
18.3. Marking and classification
18.4. Congestion Management, Queuing and Scheduling, Shaping and Policing
18.5. QoS Setup on Cisco Router
18.6. IP SLA (Service Level Agreement)

19. Wireless Networking
19.1. Overview
19.2. Characteristics of Radio Frequency and CSMA/CA
19.3. Security Measures (安全措施) / Encryption for Wireless Network
19.4. Controller-Based Wireless Architecture
19.5. Layer 2 Frames for Wireless Network
19.6. WLC (Wireless Lan Controller) Ports
19.7. Configure Cisco Wireless Network

20. Programmability and Automation
20.1. Virtualization
20.2. Cloud Computing and Service Models
20.3. Overlay, Underlay and Fabric
20.4. Software Defined Networking (SDN) / Controller-Based Networking
20.5. Northbound APIs, Southbound APIs and RESTful API (Application Programming Interfaces應用程式介面)
20.6. Data Encoding Formats / JSON
20.7. Cisco SDN (Software Defined Networking) Solutions (Cisco DNA Center)
20.8. Configuration Management / Network Automation Tools

21. Network Topology Architectures
21.1. 2-Tier / 3-Tier
21.2. Spine-leaf
21.3. Small office/home office (SOHO)
21.4. WAN (Wide Area Network)
21.5. On-premises and cloud

22. Miscellaneous
22.1. Containers
22.2. VRFs
22.3. BPDU Filter
22.4. Loop Guard
22.5. Cloud-managed network devices
22.6. AI (generative and predictive) and machine learning in network operations
22.7. REST-based APIs authentication types
22.8. Terraform

學員會於課堂內每人控制 2 部 Cisco Routers 及 2 部 Cisco Switches 進行實習。

學員會於課堂內使用 Python, Ansible 及 Linux VM 進行實習。

實習包括：

• REST-based APIs (CRUD, HTTP verbs, and data encoding) and Interpret JSON encoded data

• REST-based APIs in Python, Cisco DNA Center (S) and Interpret JSON encoded data in Python

• Configuration management mechanisms (e.g. Ansible)

• MAC address table, MAC learning and aging

• Configure and verify VLANs (normal range), access ports (data and voice) and default VLANs

• Configure and verify interswitch connectivity, trunk ports, 802.1Q and Native VLAN

• Rapid PVST+ Spanning Tree Protocol, root bridge (primary), other port names and port states (forwarding)

• Rapid PVST+ Spanning Tree Protocol, root bridge (secondary), root port, other port names and port states (forwarding/blocking).

• Rapid PVST+ Spanning Tree Protocol and PortFast.

• Configure and verify EtherChannel (LACP)

• Configure and verify Layer 2 discovery protocols (Cisco Discovery Protocol and LLDP)

• Configure and verify IPv4 addressing and subnetting

• Configure InterVLAN Routing: L3 Switch

• Configure InterVLAN Routing: Router-on-a-stick

• Configure and verify IPv4 static routing, default route, network route, host route, and floating static (longest match, administrative distance)

• Configure and verify single area OSPFv2, neighbor adjacencies, Broadcast (DR/BDR selection), Router ID. (longest match, administrative distance and routing protocol metric)

• Configure and verify single area OSPFv2, neighbor adjacencies, Point-to-point, Router ID. (longest match, administrative distance and routing protocol metric)

• Configure and verify IPv6 addressing and prefix

• Configure and verify IPv6 static routing, default route, network route, host route, and floating static (longest match, administrative distance)

• Configure and verify access control lists (Named, Standard ACL)

• Configure and verify access control lists (Named, Extended ACL)

• NAT (private IPv4 addressing, verify inside source NAT using static and pools)

• Configure and verify DHCP server, client and relay

• Configure and verify NTP operating in a client and server mode

• Configure device access control using local passwords

• Configure network devices for remote access using SSH

• Configure Layer 2 security features: DHCP Snooping

• Configure Layer 2 security features: Dynamic ARP inspection

• Configure Layer 2 security features: Port security

• 還有其他有趣實習 / Creative Labs

以下是成功取得 CCNA 認證的本中心部份學員名單：

......由於人數眾多，因此未能盡錄。

虛假失實指控 1

真相

• 對於有坊間機構作出這指控，請留意，「睇唔明，學唔識」，絕對不是因為睇 Video，而是因為導師及筆記的質素所致。
• 試想想，若導師及筆記的質素低劣，無論是 Live 教學抑或是睇 Video，你都會「睇唔明，學唔識」。
• 而 為了證明 Systematic 導師及筆記的質素絕非低劣，Systematic 一直提供免費試睇服務，令學員們可預先了解課程導師、筆記及 Video 的質素，然後才決定報讀與否。
• Systematic 建議學員們可要求坊間機構提供 免費試堂服務，坊間機構夠膽提供嗎？
• 下列是一些關於坊間機構質素的網上平台討論：
  https://computer.discuss.com.hk/viewthread.php?tid=27479148&extra=page%3D1
  https://computer.discuss.com.hk/viewthread.php?tid=29033594&extra=page%3D1
  https://computer.discuss.com.hk/viewthread.php?tid=22838794
  https://digital.uwants.com/viewthread.php?tid=6265878

請小心，這坊間機構已轉了名稱繼續營業！

虛假失實指控 2

真相

• Systematic 的課程一直以 實習眾多及步驟清楚見稱。本課程學員可隨時隨地以任何瀏覽器享用一套專屬於你的器材，來進行所有實習。

隨時：由課程開始日起計的 21 星期內，每星期 7 日，每日 24 小時。

隨地：於本中心上課時的課室、學員家中、甚至是離港旅遊時的住所等等地方。

任何瀏覽器：不論是 Windows PC、Macbook、iPad、Android等等，只要有任何的一個網頁瀏覽器。

一套專屬於你的器材，來進行所有實習：學員透過上網接駁至雲端伺服器，便能個人獨享一套器材，而這套器材等同於課堂實習時所用的器材，故學員能完整地依照實習指引來進行所有實習。

而這套專屬於你的器材會有兩部 Cisco Routers、兩部 Cisco Switches (而所用器材的型號均附合 CCNA 的考試要求)、Python, Ansible 及 Linux VM！

虛假失實指控 3

真相

• Systematic 會為學員提供考試合格保障，試想想，若 Systematic 沒有提供充足的題目給學員操練，以致 學員不能通過考試，Systematic 便要為學員代付下一次考試的全數考試費，那麼 Systematic 為何要做這種損人損己的事呢？