CCNP Enterprise 國際認可證書課程 (Full Track)
課程簡稱：CCNP Enterprise Training Course (Full)

最新內容：緊貼 CCNP Enterprise 考試，並由 Franco Tsang (CCIE #19772) 親自教授，信心保證！

適合人士：擁有 CCNA 知識的人士 (可沒有考獲 CCNA 認證)。

合格保障：學員若考試不合格，本中心均會代付考試費，令學員可 免費重考 ！詳情...

CCNP Enterprise (Cisco Certified Network Professional Enterprise，企業級 Cisco 認可電腦網路專業人士) 其實是由 Cisco 頒發的一項國際認可高級證書，而考取這項高級認證並沒有任何前設的條件 (例如無須考獲 CCNA 認證)。

只要你於下列 2 個科目取得合格成績，便可獲 Cisco 頒發 CCNP Enterprise 國際認可證書：

本中心為 Cisco 指定的 CCNP Enterprise 考試試場，報考時請致電本中心，登記欲報考之科目考試編號、考試日期及時間 (最快可即日報考)。

臨考試前要繳付考試費 (見上表)，及必須出示下列兩項有效之身份證明文件，否則考生不可進行考試，而已繳付之考試費亦不會退回：
1. 香港身份證   及
2. 附有考生姓名及簽名的證件 (如信用咭、香港特區護照、BNO等)

考試題目由澳洲考試中心傳送到你要應考的電腦，考試時以電腦作答。所有考試題目均為英文，而大多數的考試題目為單項選擇題 (意即 O) 或多項選擇題 (意即 口)，其餘則為配對題。作答完成後會立即出現你的分數，結果即考即知！考試不合格便可重新報考，不限次數。欲知道作答時間、題目總數、合格分數等詳細考試資料，可瀏覽本中心網頁 "各科考試分數資料"。

為進一步加強本中心 Cisco 的課程質素，本中心投放大量資源購買 Cisco 器材，以供學員進行實習。以下是本中心擁有的 Cisco 器材 (種類繁多，未能盡錄)：

ENCOR: Implementing and Operating Cisco Enterprise Network Core Technologies

1. Layer 2 Switching
1.1. MAC Address Table and TCAM
1.1.1. Layer 2 Forwarding
1.1.2. CAM and TCAM
1.2. VLAN
1.2.1. Overview
1.2.2. VLAN Trunk
1.2.3. Allowed and Active VLANs in Trunk
1.2.4. Exercises for VLAN Trunk
1.3. Dynamic Trunking Protocol (DTP)
1.3.1. About DTP
1.3.2. Exercises for DTP
1.4. VLAN Trunking Protocol (VTP)
1.4.1. VTP Modes and Versions
1.4.2. VTP Advertisement (宣傳)
1.4.3. VTP Pruning
1.4.4. Exercises for VTP
1.4.5. Disabling VTP Synchronization
1.5. Spanning Tree Protocol
1.5.1. Overview
1.5.2. Bridge Protocol Data Unit (BPDU)
1.5.3. Root Bridge Election
1.5.4. Root Port
1.5.5. Designated Port
1.5.6. Blocked / Non-Designated Port
1.5.7. STP Versions
1.5.8. 802.1D Port States
1.5.9. 802.1D Topology Change
1.5.10. 802.1w RSTP Port States
1.5.11. RSTP Alternate Port and Backup Port
1.5.12. RSTP Edge Port
1.5.13. 802.1w Topology Change
1.5.14. PVST+ and Rapid-PVST+
1.5.15. Exercise for STP and RSTP
1.5.16. Multiple Spanning Tree (MST) Protocol
1.5.17. Exercise for MSTP
1.6. EtherChannel
1.6.1. Overview
1.6.2. EtherChannel Setup
1.6.3. Load Balancing Methods
1.6.4. Exercise for EtherChannel
1.6.5. Layer 3 EtherChannel
1.7. Layer 2 Protocols in Trunk Link (參考章節)

2. Layer 3 Routing
2.1. Open Shortest Path First (OSPF)
2.1.1. Overview
2.1.2. Areas and LSA Types
2.1.3. OSPF Route Summarization
2.1.4. OSPF Route Filtering
2.1.5. About OSPF Network Types
2.1.6. Exercise for OSPF
2.2. Enhanced Interior Gateway Routing Protocol (EIGRP)
2.2.1. Overview
2.2.2. EIGRP Neighboring
2.2.3. EIGRP Metric
2.2.4. Split Horizon
2.2.5. Poison Route and Poison Reverse
2.2.6. Feasible Successor (可行的繼承者)
2.2.7. Unequal-Cost Load Balancing
2.2.8. Exercise for EIGRP
2.3. Border Gateway Protocol (BGP)
2.3.1. Overview
2.3.2. BGP Peering
2.3.3. eBGP Routing Updates
2.3.4. BGP Path Attributes
2.3.5. BGP Best Path Selection Algorithm
2.3.6. Exercise for BGP
2.4. Layer 3 Routing Operation
2.4.1. Process Switching
2.4.2. Fast Switching
2.4.3. Cisco Express Forwarding (CEF)
2.5. Virtualization of Networks
2.5.1. Overview
2.5.2. Virtual Route Forwarding (VRF)
2.5.3. Generic Routing Encapsulation (GRE) Tunnel
2.5.4. Exercise for VRF and GRE Tunnel

3. IP Services and QoS
3.1. Network Time Protocol (NTP)
3.1.1. Overview
3.1.2. Basic NTP Configuration
3.1.3. NTP Authentication
3.1.4. NTP Access Control
3.1.5. Exercise for NTP
3.2. NAT / PAT
3.2.1. Overview
3.2.2. NAT Configuration in Cisco Router
3.2.3. Exercise for NAT
3.3. First Hop Redundancy Protocol (FHRP)
3.3.1. Overview
3.3.2. Hot Standby Router Protocol (HSRP)
3.3.3. Virtual Router Redundancy Protocol (VRRP)
3.3.4. Gateway Load Balancing Protocol (GLBP)
3.3.5. Exercise for HSRP and VRRP
3.3.6. About Stateful SwitchOver (SSO)
3.4. QoS
3.4.1. Overview
3.4.2. Congestion Management / Avoidance
3.4.3. Classification
3.4.4. Marking

4. Monitoring
4.1. System Logging (Syslog)
4.1.1. Overview
4.1.2. Syslog Destination
4.1.3. Exercise for Syslog
4.2. SNMP
4.2.1. Overview
4.2.2. SNMP Agent Configuration
4.2.3. Exercise for SNMP
4.3. NetFlow
4.3.1. Overview
4.3.2. Basic NefFlow Configuration
4.3.3. Flexible NetFlow
4.3.4. Exercise for NetFlow
4.4. Switched Port Analyzer (SPAN)
4.4.1. Overview
4.4.2. SPAN
4.4.3. RSPAN
4.4.4. ERSPAN
4.4.5. Exercise for SPAN
4.5. IP SLA
4.5.1. Overview
4.5.2. IP SLA Responder
4.5.3. IP SLA Configuration
4.5.4. Using IP SLA as Track Object
4.5.5. Exercise for IP SLA

5. Security
5.1. Basic Login Authentication
5.1.1. Login Authentication using Password
5.1.2. Login Authentication using Local Username & Password
5.2. Privilege Levels
5.2.1. Overview
5.2.2. Granting Privilege Level to CLI session
5.2.3. Using Other Privilege Levels
5.3. AAA System
5.3.1. Overview
5.3.2. Configuring Authentication
5.3.3. Configuring Authorization
5.3.4. Exercise for AAA
5.4. Access Control List
5.4.1. Overview
5.4.2. ACL Types
5.4.3. Wildcard Mask
5.4.4. Matching Port Numbers
5.4.5. ACL Rules Ordering
5.4.6. Inbound and Outbound Access Lists
5.4.7. Exercise for ACL
5.5. Control Plane Policing (CoPP)
5.5.1. Overview
5.5.2. Configuration
5.5.3. Exercise for CoPP
5.6. Other Security Features and Devices
5.6.1. 802.1X
5.6.2. Cisco Cyber Threat Defense (CTD)
5.6.3. TrustSec / MACsec

6. Multicast
6.1. Overview
6.1.1. Background
6.1.2. Multicast IPv4 Address Range
6.2. Multicast in Ethernet Network
6.2.1. Background
6.2.2. Multicast MAC Address Mapping
6.3. Multicast Routing
6.3.1. Background
6.3.2. Internet Group Management Protocol (IGMP)
6.3.3. PIM (Protocol Independent Multicast) Overview
6.3.4. PIM Dense Mode (PIM-DM)
6.3.5. PIM Sparse Mode (PIM-SM)
6.3.6. Exercise for IGMP and PIM
6.4. IGMP Snooping (窺探)

7. Wireless Networking
7.1. Overview
7.1.1. Wireless Standards, Bands and Channels
7.1.2. Signal Strength
7.1.3. Authentication and Encryption
7.2. Autonomous AP
7.3. Controlled Based Wireless Networking
7.3.1. About Wireless LAN Controller
7.3.2. CAPWAP
7.3.3. AP Discovery and Join Process
7.4. WLC Configuration
7.5. Roaming and Mobility
7.5.1. Intra-Controller Roaming
7.5.2. Inter-Controller Roaming
7.5.3. Mobility Group
7.5.4. 802.11r (Fast BSS Transition)
7.6. FlexConnect
7.7. About Wireless QoS

8. Network Virtualization and Automation
8.1. Virtualization
8.1.1. About Virtual Machines
8.1.2. Hypervisor and Types of Virtualization
8.1.3. Virtualized Hardware
8.2. Cloud
8.2.1. About Cloud Computing
8.2.2. Cisco Products for Cloud Deployment
8.3. Network Topology Architectures
8.3.1. Traditional Topologies
8.3.2. Spine (脊柱) and Leaf Topology
8.4. Network Virtualization Overlay (重疊覆蓋)
8.4.1. Overview
8.4.2. Cisco FabricPath
8.4.3. Cisco VXLAN (Virtual eXtensible LAN虛擬可擴展局域網)
8.4.4. LISP (Locator/ID Separation Protocol)
8.5. Software Defined Networking (SDN)
8.5.1. Traditional Approach
8.5.2. Controller-Based Approach
8.5.3. Cisco DNA Center
8.5.4. SD-Access
8.5.5. SD-WAN
8.6. Network Automation
8.6.1. RESTful API
8.6.2. JSON (JavaScript Object Notation)
8.6.3. NETCONF (Network Configuration Protocol)
8.6.4. RESTCONF (Network Configuration Protocol)
8.6.5. YANG Data Model
8.6.6. Network Automation Tools
8.6.7. Python
8.6.8. EEM
8.6.9. Exercise for Network Automation

ENARSI: Implementing Cisco Enterprise Advanced Routing and Services

1. Routing Basics
1.1. Routing Protocols
1.1.1. Overview
1.1.2. Exterior Gateway Protocol (EGP)
1.1.3. Interior Gateway Protocol (IGP)
1.2. Routing Table
1.2.1. Administrative Distance (AD)
1.2.2. Load Balancing Routes
1.2.3. Cisco Express Forwarding (CEF)
1.3. Loop Prevention Mechanism
1.3.1. Distance Vector Routing Protocols
1.3.2. Link State Routing Protocols
1.3.3. Path Vector Routing Protocols
1.4. Fault Detection Mechanism

2. Enhanced Interior Gateway Routing Protocol (EIGRP)
2.1. Overview
2.1.1. EIGRP Hello and Neighboring
2.1.2. EIGRP Metric
2.1.3. DUAL Algorithm
2.1.4. Unequal-Cost Load Balancing
2.1.5. Route Summarization
2.2. EIGRP Authentication
2.3. EIGRP Neighboring in Non-Broadcast Network
2.4. EIGRP Query and Stuck-In-Active
2.5. Route Filtering
2.5.1. Distribute List
2.5.2. Prefix List
2.5.3. Route Map
2.6. EIGRP Stub
2.7. Route Leaking
2.8. EIGRP Named Mode
2.9. EIGRP Configuration Example
2.9.1. Exercise for EIGRP
2.9.2. EIGRP Query Example

3. Open Shortest Path First (OSPF)
3.1. Overview
3.1.1. OSPF Neighboring
3.1.2. Areas and LSA Types
3.1.3. Route Summarization and Filtering
3.1.4. OSPF Metric / Cost
3.2. OSPF Authentication
3.3. Virtual Link
3.4. OSPF Stub Area
3.4.1. Stub Area
3.4.2. Totally Stub Area
3.4.3. Not So Stubby Area (NSSA)
3.4.4. Totally Not So Stubby Area.
3.4.5. Summary
3.5. OSPF Network Types
3.5.1. Overview
3.5.2. Point-to-Point
3.5.3. Broadcast
3.5.4. Loopback
3.5.5. Non-Broadcast MultiAccess / NBMA
3.5.6. Point-to-Multipoint
3.5.7. Point-to-Multipoint Non-broadcast
3.5.8. Summary
3.6. OSPF for IPv6
3.7. Configuration Examples
3.7.1. Exercise for OSPF
3.7.2. More about Route Filtering in OSPF (參考章節)
3.7.3. EIGRP Example for Partially Meshed Network

4. Border Gateway Protocol (BGP)
4.1. Overview
4.1.1. BGP Peering
4.1.2. BGP Routing Updates
4.1.3. BGP Path Attributes
4.1.4. BGP Best Path Selection Algorithm
4.2. More about BGP Peering
4.3. BGP Route Summarization
4.3.1. Summarization before Entering BGP Table
4.3.2. Summarization by BGP
4.3.3. Summarization with as-set
4.3.4. Summarization with Route Leaking
4.4. BGP Route Filtering
4.4.1. Route Filtering Configuration
4.4.2. BGP Route Refresh
4.5. BGP Dampening
4.6. iBGP
4.6.1. iBGP Peering
4.6.2. Route Reflector
4.6.3. Confederation
4.6.4. BGP Next Hop and Synchronization Rule
4.7. BGP for IPv6
4.8. Exercise for BGP

5. Redistribution
5.1. Overview
5.2. Parameters for redistribute Command
5.2.1. Types of Routes
5.2.2. Metric Value
5.2.3. Other Parameters
5.2.4. Example
5.3. Filtering
5.4. Problems in Redistribution
5.4.1. Only One Router at Routing Protocols’ Boundary
5.4.2. Two Routers at Routing Protocols’ Boundary
5.4.3. Two Routers performing Redistribution
5.4.4. More Complex Redistribution Problems
5.5. Route Tagging
5.6. Exercise for Redistribution

6. Policy Based Routing
6.1. Overview
6.2. PBR Configuration
6.2.1. Sample Route Map for PBR
6.2.2. match condition in Route Map for PBR
6.2.3. set in Route Map for PBR
6.3. Exercise for PBR

7. MPLS
7.1. MPLS
7.1.1. Overview
7.1.2. MPLS Label
7.1.3. Label Assignment and LIB
7.1.4. Label Exchange
7.1.5. Label Forwarding Information Base (LFIB)
7.1.6. Label Operations
7.1.7. Penultimate Hop Popping (PHP)
7.1.8. MPLS Configuration
7.2. MPLS VPN
7.2.1. Overview
7.2.2. VRF
7.2.3. MP-BGP
7.2.4. More about Setup / Feature for MPLS VPN
7.3. Exercise for MPLS

8. VRF Lite
8.1. Overview
8.2. Examples for Connecting Two VRF-Lite Routers
8.3. Import / Export Routes Between VRFs
8.4. Exercise for VRF Lite
8.5. Other Ways for Inter-VRF Routing
8.5.1. Inter-VRF Static Routes
8.5.2. Inter-VRF PBR

9. DMVPN
9.1. Overview
9.2. mGRE
9.3. NHRP
9.4. IPsec
9.4.1. Background
9.4.2. Traditional IPsec VPN Setup (參考章節)
9.4.3. IPsec Setup for DMVPN
9.5. Additional DMVPN Settings
9.5.1. Multicast Traffic
9.5.2. NHRP Tuning
9.5.3. Working with OSPF
9.5.4. Working with EIGRP
9.5.5. DMVPN Phase 3
9.6. Exercise for DMVPN

10. Security
10.1. IPv6 Security
10.1.1. IPv6 Access List
10.1.2. IPv6 First Hop Security (FHS)
10.2. Unicast Reverse Path Forwarding (uRPF)
10.2.1. Background
10.2.2. Mechanism and Configuration of uRPF
10.2.3. Options for Configuring uRPF
10.3. Access Control / Policy for Router’s Service
10.3.1. Inbound ACL
10.3.2. Service’ Access Control by ACL
10.3.3. Service’ Access Control by Authentication
10.3.4. Control Plane Policing (CoPP)
10.4. Exercise for Security

11. Monitoring and Troubleshooting
11.1. Config Log Archive
11.1.1. Overview
11.1.2. Configuration Settings
11.1.3. Password / Key Protection
11.1.4. Sending to Syslog
11.1.5. Time Information
11.2. IP SLA
11.2.1. Overview
11.2.2. Configuring Reaction Configuration
11.2.3. Configuring Track Object
11.3. Other Monitoring Tools
11.3.1. SNMP
11.3.2. SNMP Trap
11.3.3. NetFlow
11.4. DHCP
11.4.1. DHCP Operations
11.4.2. DHCP Configuration
11.4.3. DHCP Relay Agent
11.5. Exercise for Monitoring / Troubleshooting
11.6. Troubleshooting with Cisco DNA Center Assurance

虛假失實指控 1

真相

• 對於有坊間機構作出這指控，請留意，「睇唔明，學唔識」，絕對不是因為睇 Video，而是因為導師及筆記的質素所致。
• 試想想，若導師及筆記的質素低劣，無論是 Live 教學抑或是睇 Video，你都會「睇唔明，學唔識」。
• 而 為了證明 Systematic 導師及筆記的質素絕非低劣，Systematic 一直提供免費試睇服務，令學員們可預先了解課程導師、筆記及 Video 的質素，然後才決定報讀與否。
• Systematic 建議學員們可要求坊間機構提供 免費試堂服務，坊間機構夠膽提供嗎？
• 下列是一些關於坊間機構質素的網上平台討論：
  https://computer.discuss.com.hk/viewthread.php?tid=27479148&extra=page%3D1
  https://computer.discuss.com.hk/viewthread.php?tid=29033594&extra=page%3D1
  https://computer.discuss.com.hk/viewthread.php?tid=22838794
  https://digital.uwants.com/viewthread.php?tid=6265878

請小心，這坊間機構已轉了名稱繼續營業！

虛假失實指控 2

真相

• Systematic 的課程一直以 實習眾多及步驟清楚見稱。
• Full Track 課程學員是 於家中透過上網來控制本中心的器材，並依照筆記來進行眾多 Routers 及 Switches 實習；
• Fast Track 課程學員則 於課室內以內聯網來控制本中心的器材，並依照筆記來進行眾多 Routers 及 Switches 實習。

虛假失實指控 3

真相

• Systematic 會為學員提供考試合格保障，試想想，若 Systematic 沒有提供充足的題目給學員操練，以致 學員不能通過考試，Systematic 便要為學員代付下一次考試的全數考試費，那麼 Systematic 為何要做這種損人損己的事呢？