HCIA-Datacom (Huawei Certified ICT Associate - Datacom) 國際認可證書課程
課程簡稱：HCIA Datacom Training Course

華為是全球領先的資訊與通信技術 (ICT) 解決方案供應商。華為的產品覆蓋了企業網路、電信網路、雲計算和物聯網等領域，為全球無數用戶提供服務。眾多企業均採用華為的產品和解決方案，因此，掌握華為網路設備的管理技術成為一項重要的專業技能。

為了證明你具備專業水準來安裝、配置及管理華為的網路產品，華為推出了 HCIA-Datacom (Huawei Certified ICT Associate - Datacom) 國際認可證書考試。本中心的 HCIA-Datacom 課程由經驗豐富的網路專家精心設計，課程內容涵蓋考試大綱。課程包括課堂講授、課堂實習、考試研習和模擬試題等環節，為你量身打造一個系統化的學習過程，助你快速而有效地取得認證。

只要你於下列科目取得合格成績，便可獲頒 HCIA-Datacom 國際認可證書：

本中心為Huawei指定的 HCIA-Datacom 考試試場，報考時請致電本中心，登記欲報考之科目考試編號、考試日期及時間 (最快可即日報考)。

臨考試前要繳付考試費 HK$1,640，及必須出示下列兩項有效之身份證明文件，否則考生不可進行考試，而已繳付之考試費亦不會退回：
1. 香港身份證   及
2. 附有考生姓名及簽名的證件 (如信用咭、香港特區護照、BNO等)

考試題目由澳洲考試中心傳送到你要應考的電腦，考試時以電腦作答。所有考試題目均為英文，而大多數的考試題目為單項選擇題 (意即 O) 或多項選擇題 (意即 口)，其餘則為配對題。作答完成後會立即出現你的分數，結果即考即知！考試不合格便可重新報考，不限次數。欲知道作答時間、題目總數、合格分數等詳細考試資料，可瀏覽本中心網頁 "各科考試分數資料"。

1. Data Communication and Network Basics

1.1 Data Communication Network Basics
- Basic Concepts of Data Communication
- Data Transfer Process
- Network Devices and Basic Functions
- Network Type and Topology Type
- Network Engineering
- Network Engineers

1.2 Network Reference Model
- What is Data and Data Transfer
- Common Standard Protocols
- Layered Model Concept
- Application Layer and Related Protocols
- Transport Layer and Related Protocols
- Network Layer and Related Protocols
- Data link Layer and Related Protocols
- Physical Layer and Related Protocols
- Data Transfer, Encapsulation and Decapsulation

1.3 Huawei VRP Basics
- Common Network Devices
- VRP Basics
- CLI Command Views
- Basic Commands and Function Keys of the CLI

2. Constructing an Interconnected IP Network

2.1 Network Layer Protocol and IP Addressing
- Network Layer Protocol
- Concept, Classification, and Special IP Addresses of IPv4
- IP Network and IP Subnet Calculation
- IP Network Address Planning

2.2 IP Routing Basics
- Basic Working Principles of Routers
- Routing Table Concepts
- Routing and Forwarding Features
- Static Route Configuration

2.3 OSPF Basics
- Basic Features of OSPF
- OSPF Application Scenarios
- Working Principle of OSPF
- Basic OSPF configurations

3. Constructing an Ethernet Switching Network

3.1 Ethernet Switching Basics
- Basic Concepts of Ethernet
- Concept of MAC Address
- Working Process and Principles of Layer 2 Switches
- Composition and Formation of a MAC Address Table

3.2 VLAN Principles and Configuration
- Background of VLAN
- Basic Concepts and Principles of VLAN
- VLAN Data Communication Process on a Layer 2 Network
- Basic VLAN Configuration

3.3 Spanning Tree Protocol
- Background of STP
- Basic Concepts and Working Principles of STP
- Basic Concepts of RSTP and Improvements Compared with STP
- Basic STP Configuration
- Other Layer 2 Loop Elimination Technologies

3.4 Ethernet Link Aggregation and Switch Stacking
- Basic Concepts of Link Aggregation
- Working Principles of Manual Link Aggregation
- Working Principles and Features of Link Aggregation in LACP Mode
- Basic Concepts of iStack and CSS

3.5 Implements Communication Between VLANs.
- Working Principles of Sub-interfaces
- Working Mechanism of Layer 3 Switches
- Sub-interface Configuration
- VLANIF Configuration

4. Network Security and Network Access Basics

4.1 ACL Principles and Configuration
- Basic Principles and Functions of ACLs
- Basic Structure and Matching Order of ACL Rules
- Usage of Wildcard mask
- Basic ACL Configuration

4.2 AAA Principles and Configuration
- Basic Principles and Application Scenarios of AAA
- Basic Configuration of the Local AAA

4.3 NAT Basics
- Background of NAT
- NAT Classification and Technical Principles
- NAT Configuration in Different Scenarios

5. Network Services and Applications

5.1 Network Services and Applications
- Principles of TFTP, FTP, DHCP, and HTTP
- Configuration of FTP and DHCP

6. WLAN Basics

6.1 WLAN Overview
- Basic Concepts of WLAN and History of 802.11 Protocol suite
- WLAN devices
- WLAN Networking Mode
- WLAN Working Process
- Basic WLAN Configuration

7. WAN Basics

7.1 WAN Technology Basics
- Basic WAN Concepts
- Common WAN Technologies
- Working Principles of PPP and PPPoE
- Configuring PPP and PPPoE
- Basic Concepts of MPLS/SR

8. Network Management and O&M

8.1 Network Management and O&M
- Basic Concepts of the NMS and O&M
- Common NMS and O&M Methods and Tools
- Working Principle of SNMP
- SDN-based NMS and O&M Solution

9. IPv6 Basics

9.1 IPv6 Basics
- Comparison Between IPv6 and IPv4
- Basic Concepts of IPv6
- Format and Principle of the IPv6 Packet Header
- IPv6 Address Format and Address Type
- IPv6 Address Configuration Method and Procedure
- Static and Dynamic IPv6 Address Configuration
- IPv6 Static Route Configuration

10. SDN and Automation Basics

10.1 SDN and NFV Basics
- Basic SDN Concepts
- Huawei SDN Products and Solutions
- Basic NFV Concepts
- Huawei NFV Products and Solutions

10.2 Network Programming and Automation
- Traditional Network O&M Status Analysis
- Implementation of Network Automation
- Programming Language
- Python Coding Specifications
- Implement Basic Automatic O&M Using Python telnetlib.

11. Typical Campus Network Architectures and Practices

11.1 Typical Networking Architecture and Cases
- Campus Network Architecture
- Campus Network Lifecycle
- Campus Network Construction Cases
- Campus Network Construction Practice

學員會於課堂內控制 Huawei 器材進行各種實習。

學員會於課堂內使用 REST API、Python 等技術進行各種實習。